Save Your Marble and Family by Cleaning Marble the Green Way

Posted on by

Are you having a hard time keeping your marble counter tops and floors shiny and clean like they used to? Have your marble-made surfaces gone dull and nasty? Perhaps, your marble floors already have chips or damages from just a short period of time. But aren’t marble stones supposed to be tough no matter how porous they are? Worry not if you think that you’re the only one who has this kind of dilemma. As you can see, many households are also having trouble dealing with various marble cleaning problems.

In general, marble-made surfaces are not really hard to maintain or kept clean and shiny. In fact, marble and granite are among those easy to clean natural stones. And that seemed to be one of the reasons why many people choose them over other stones or solid surfaces such as wood.

However, with improper or tough means of handling such as slicing over the surface, placing hot pots and pans on marble counter tops, dragging pointed fixtures and other objects against marble floors and so many other actions which can trigger damage and unsightly appearance, marble surfaces are likely to lose its shine and durability.

The methods people usually employ to clean marble may also be the cause of its devastation. Improper marble cleaning methods can cause further damage to the surface. Tough means of removing stains or spills can greatly affect the shine of marble. You don’t have to scrub down those stains; otherwise, scratches and discoloration may occur. You can simply wipe off the spills and stains but of course, in a careful and systematic way.

Cleaning products or marble floor cleaners applied is the main contributing factor when it comes to marble pieces becoming hideous and damaged. For your information, inappropriate especially toxic cleaners can never serve you well in terms of cleaning marble. Though toxic cleaners can help you deal with stubborn stains, they should never be your choice as far as marble cleaning is concerned. Aside from the damage that your marble can get, it is likely for your health and the planet to be at risks.

Clean marble with the aid of natural cleaning products instead of the ones you typically use. Fret not if you think natural cleaning products may harm your marble just like what toxic cleaners can do. As mentioned, cleaning products from the Green Bean Line or marble floor cleaners fabricated by eco-conscious companies are earth-friendly yet can perform well just like conventional products. This being said, you get to clean marble as efficient as you want with less the harm or toxic.

Your methods and cleaning products used to clean marble should be able to give you positive results without compromising your health and the welfare of the planet. The atmosphere suffered more than enough from the effects of excessive toxic cleaners’ usage. Too much chemical exposure has been one of the reasons why the planet has been experiencing various threats. More and more people are also getting sick because of it. As you can see, most households have been relying on the aid of toxic cleaners and other products enhanced with chemicals.

So bring back the beauty and shine of your marble counter tops and floors by cleaning marble with the use of natural means and eco-friendly marble cleaners. Instead of applying toxic cleaners, go for the use of natural cleaning products. Save your marble as well as your health and the planet by going green with your marble cleaning and other means of keeping your house clean. Properly dispose harmful cleaners and resort to organic ones. This way, you can live a better, healthier, cleaner and greener home.

Do-It-Yourself Bathroom Renovation

Posted on by

Is your bathroom showing signs of wear and tear? Is it time to update your old bathroom décor with something fresh and hip? With proper planning and a little bit of know-how, you can do your own bathroom renovation that will save you money and bring your bathroom back to life!

Remodeling your bathroom can seem like a daunting task at first. However, if you have a design in mind, it can be a creative and rewarding experience for you and your family. First, depending on the size of the renovation project, you’ll need to assess your skill levels. If you’re a whiz at plumbing and electrical work, you may not need to hire contractors to help.

However, you may want to seek out professionals if you’re not comfortable doing this kind of work yourself. This can save you money later by sparing you from unnecessary repairs due to mistakes. Decide how much or how little remodeling you want to do and then figure out what theme you want your bathroom to have.

Do you need to replace the lights, the sink, the shower, or the bathtub? Will you need new flooring or can you work with what you have? You will probably need new paint, so decide on how much of it you’ll need ahead of time. These are all good things to take into consideration before beginning your bathroom renovation project.

Replacing the tiles on your bathroom floor and walls is often a great and relatively inexpensive way to update the look of your bathroom. This can take some time, but not as much as a full renovation, so you may want to consider this for a quick fix that will be sure to turn heads. Couple new tiles with fresh paint and you’re sure to have a pleasing updated look that will last a long time.

If you’re planning a full bathroom renovation, don’t forget to update the accessories like lighting fixtures, mirrors, faucets, and other accoutrement. You’ll want to make sure everything is updated and replaced at the same time to prevent it from becoming an ongoing project. Check out the home improvement aisles of your local discount stores for the best prices on these items.

Renovating your bathroom doesn’t have to be a chore. Make your bathroom the focal point of your home quickly and easily by planning a wonderful new design and gathering the tools you need for a successful do-it-yourself endeavor. Pick up a few books that will help explain the process and before you know it, you’ll have a new bathroom that’s the envy of all your neighbors.

Bathroom Electrical Wiring – Issues and Safety Precautions

Posted on by

According to the Consumer Product Safety Commission, tens of thousands of fires happen all over the United States every year that are caused by electrical issues. Besides the millions of property damage that are incurred, there is also the unfortunate loss of life that happens in hundreds of these kinds of cases. There are also hundreds of consumer products that can cause electrocution and death (especially with bathroom electrical wiring), so it is best that the appropriate safety precautions are done in order to prevent any sort of unfortunate incident to happen.

A Volatile and Dangerous Mix

It is a well known fact that water and electricity just do not mix. It is a very deadly combination. So you can just imagine the kinds of dangers you have with bathroom electrical wiring systems. Of course, no one can eliminate entirely the need for bathroom electrical wiring systems – with outlets for dryers, heaters, lights, and all other electrical appliances you use in the bathroom, all you can really do is to observe the proper safety precautions and steps to make sure that the electrical system in your bathroom is safe for you and all who use the bathroom.

Some Safety Tips

1. Have a GFCI device installed.
The National Safety Code requires the installation of a Ground Fault Circuit Interrupter or GFCI to be able to deal with cases of having to install outlets in bathrooms. This is to minimize the incidence of electrocution or any other electrical incident that involves the mix of water and bathroom electrical wiring through sockets and outlets. GFCI units are designed to cut off the supply of electricity to an outlet when there is a loss of current in a circuit.

2. Have some exhaust fans installed.
Imagine coming home from a long and hard day’s work to enjoy a relaxing time in the tub, or maybe just taking a long, warm shower. Your body dissipates heat during these times, so leaving a bathroom unventilated will cause moisture and humidity to accumulate inside. This poses danger to your bathroom electrical wiring, so it is best to install an exhaust fan so that air can circulate inside the bathroom space and no steam or moisture will build up inside.

3. Have moisture-splash proof switches.
There will be times when you need to open a light switch with wet hands, or maybe forget to dry your hands before you touch and turn on the switch. You can also have children who will inevitably splash water on your switches. To avoid the risk for any short circuits and electrocution, it is recommended that you install splash proof switches as part of your bathroom electrical wiring system. This will prevent water from entering the switch and coming into contact with the wiring system.

Even in the bathroom, we need to have bathroom electrical wiring installed. It’s an inescapable fact that we have incorporated the use of electricity even in environments where we use water. Fortunately though, there are steps we can follow and safety precautions we can observe to minimize – if not entirely eliminate – the risk for any electricity related incidents and injuries. And you can’t go wrong with hiring a professional electrician to look over your bathroom electrical wiring.

Expert Tips You Absolutely Must Know Before Taking On A Garage Door Repair Project

Posted on by

Any home improvement project is close to a homeowner’s heart. However, these projects are extremely important as well because you depend on them for the structural and functional integrity of your home. Garage doors are an essential aspect of your home. Usually these doors take quite a lot of beating with frequent use. You also have to consider the occasional bumps and bruises from starting drivers in your household. Taking all this into stride, it is expected to take on frequent garage door maintenance projects. Here is all you need to know before you start with your next repair on your garage doors.

Tips to auditing the condition of the garage door

The extent of the work that needs to be done and the final cost of the project depend on how carefully you audit the condition of your garage door before you start the project. Here are a few tips to guide you in the direction.

· Extent of the damage: The type of the door and the extent of damage that it has sustained should be the starting aspect of your inspection. The damages can be as minor as small blemishes and chipping to major problems with the technological receptors of the door.

· Door Designs: The difference in the design of the door will majorly affect the final work to be done on the door. Every different design comes with different mechanisms to handle the design.

· Materials used for the door: The market contains a wide range of choice of materials to be used for doors. Subsequently the type of materials and the components used to build the door are extremely important for the repair strategy.

Tips to reduce overall costs for garage door repairs

Here are a few tips that you can use to actively reduce your overall project costs for your garage door repairs and overall garage makeover. These are also maintenance guidelines, which can help you increase the longevity of your garage, doors, thus, needing fewer repairs down the line.

· Keep the door tracks clean: The garage tracks often collect debris and dirt that might make it strenuous for the door to function properly. Keeping the tracks clean will exert lesser pressure on the doors over time.

· Realignment of the sensors: Garage doors often get out of alignment due to frequent use. Depending on the type of sensors that you are using, there should be a warning light blinking to warn you of this situation. Realignment can be handled manually. You should also check for obstructions or dirt and moisture damage that might be causing the issue.

· Adjustment of loose components: Nuts, bolts, and even springs in the mechanism might come loose. This exerts undue instability over the entire mechanism of the door. Leaving this issue unattended might cause many problems in the future. Instead check for these anomalies and just give them a good conditioning and tightening to avoid heavier repair costs in the future.

Finally, know when to call in a professional to handle the project. If it is getting overwhelming and especially if this is, you first time with such a project, a professional supervision might actually save you money and time over time.